The common reasons to purchase a used handgun are to save money or acquire a model no longer in production. For example, Some gun owners own several used Colt Diamondback revolvers in .22 LR and .38 Special, all of which were purchased after the Diamondback was discontinued.Guns hold their value very well, so if you later decide to trade or sell a used gun you should be able to get pretty much what you paid for it, assuming you paid a fair price.
This is very important to those of us who have bought and sold a fair number of firearms for personal use. Before you buy, check the price and condition of any used firearm in Fjestad's Blue Book of Gun Values, which is the accepted reference for pricing.
Buy from someone that you trust. If you are not an experienced used gun buyer, perhaps the most important thing is to buy from someone you trust. A reputable gun shop is not looking to rip you off, they are looking for repeat customers and they should have already inspected the gun for condition and safety before putting it on the rack. They should be willing and able to give you an honest appraisal of the gun.
Most will allow you to return a used gun for a refund or exchange within a reasonable period of time (like a week, not a month!) if it doesn't meet normal standards of accuracy and function. Obviously, a handgun being returned must come back in the same condition it left the store.
Always test any pistol for function and accuracy with factory loads. If there is a problem, you want to be sure that reloaded ammunition cannot be blamed..
Buying through the mail or Internet. For the novice used gun buyer is to avoid doing so. Don't buy any firearm you cannot inspect first. Not that there is a problem with most mail order sales, but should there be a problem you are entirely dependent of the good offices of a stranger. It is always better to deal face to face with the seller.
How to check the condition of a used handgun--general points. Before handling any firearm, always open the action and verify that both the chamber and the magazine are empty. Remove the magazine if possible. Every time a firearm changes hands it should be cleared.
1. Look at the overall condition of the gun. Notice the condition of the bluing and the overall wear. Look for rust pitting on external metal surfaces. Are the grips in good condition? All screws should be tight and the screw heads un-marred. The gun doesn't have to be perfect in every area, but it should show care rather than neglect. A pistol could be rough on the outside, yet perfect on the inside, but the chances are that an owner who didn't care for the external parts of a gun also didn't care for the parts you can't see.
2. The size, shape and angle of the grip should fit your hand. When you bring the gun to eye level your master eye should be looking straight down on the barrel. The gun should not be tipped up or down. Having a gun that points naturally is especially important for a pistol that might be used for protection.
3. Look carefully down the external length of the barrel to see that it looks straight and there are no subtle bulges. Don't buy any handgun if you suspect that the barrel (or the cylinder of a revolver) has been bulged, no matter how slightly, or if it is not straight. Also look at the crown of the muzzle--it should not be dinged.
4. Note the position of the rear sight on guns with adjustable sights. If it is way off to one side, suspect some sort of problem and ask to shoot the gun to verify accuracy before purchase.
5. Check the condition of the grips. There should not be any splits, chips, or cracks in the grips, particularly if you are looking at a discontinued model (for which it may be hard to find replacement grips). Scratches in the grip finish, worn checkering, and tiny nicks in the grips will not affect the gun's function, but should lower the price.As the screws holding wood grips to the grip frame are tightened they will tend to pull deeper and deeper into the wood. Check to see that they are not about to pull clear through. This is particularly common with Ruger single action (SA) revolvers, but applies to most guns with wooden grip panels.
6. Get permission to dry fire the gun and check the trigger pull. Dry firing will not hurt most centerfire handguns, but it is still a good idea to use snap caps to protect the firing pin.Whatever the trigger pull weight, it should be consistent from shot to shot. If it feels like a stock factory trigger (too heavy with some creep), fine, you can get it adjusted later. If it feels crisp and breaks at 2.5-3 pounds it has probably been worked on or adjusted. This is great if done properly, as it will save you some money, but make sure that the piece will not jar off.To test this, get permission to bump the butt of the cocked handgun against some firm but padded surface. The gun should not fire. Push against the fully cocked hammer (if the pistol has one) with your thumb--it should not slip out of its notch; reject the gun if it does.
7. Check the inside of the barrel (and the chambers of a revolver's cylinder). If the barrel is dirty, ask that it be cleaned or for permission to clean it yourself. Do not oil the barrel after cleaning, and be suspicious of any barrel that has been oiled. The shine from the oil can hide minor barrel imperfections and pitting.Once the barrel is reasonably clean, dry, and oil free, open the action or remove the barrel and look into it from both ends. Use a bore light. Hopefully it will be clean and bright with sharp rifling. A slight amount of rust or pitting inside the barrel (or the cylinder of a revolver) will ordinarily not seriously degrade the performance of a handgun, unless it is a target pistol, but it should lower the used price.
This is the first of two blogs on Buying a Used handgun, check out next weeks blog. Click HERE to learn more about guns at Sportsmans un Room.com.
